Ringwood has plenty of renovated 1960s–1980s homes and newer townhouses where older wiring can meet modern loads. A visual electrical check helps spot visible switchboard, wiring and smoke alarm issues before they become a safety or compliance problem.
Answer a few quick questions to receive your personalised quote for Ringwood
Complete this step to continue
Our comprehensive service includes everything you need to make an informed decision about your property.
We visually assess the switchboard/meter enclosure for signs of heat damage, corrosion, missing blanks, unsecured covers, poor labelling, and general condition. These visible clues can indicate overload risk, water entry, or past faults that should be investigated by an electrician.
We check whether safety switches appear to be installed and how they’re arranged for common circuits, noting any apparent gaps. While we don’t test trip times in a visual-only inspection, visible RCD coverage can highlight where extra protection may be needed for bathrooms, outdoor circuits or older sections of the home.
We inspect exposed cabling we can safely view in areas like the garage, underfloor access points (where accessible), and around the switchboard. We look for brittle insulation, unsupported runs, cable damage, and improvised joins that can create shock or fire risk.
We visually note the condition of accessible service entry points and clearances as seen from ground level, including obvious sagging, abrasion points, or damaged conduit. These items can be overlooked during renovations and may need an electrician’s attention if concerns are visible.
Where accessible, we look for visible warning signs such as cracked outlets, scorch marks, loose fittings, or unsafe external fixtures. These indicators can point to overheating, water ingress, or unsuitable outdoor ratings, especially around alfresco areas and garages.
We visually confirm smoke alarms where accessible and comment on obvious placement issues or missing alarms. We don’t perform compliance certification or functional testing as part of a visual-only service, but we flag anything that appears absent or unsuitable so you can address it before move-in.
Discover why thousands of property buyers trust us with their most important investment.
Professional inspections with attention to every detail. Here's a glimpse of our work.
Inspection photo 1
Inspection photo 2
Inspection photo 3
Get Electrical Visual Inspection as part of a comprehensive inspection package
Find answers to the most frequently asked questions about our inspection service.
A visual inspection is a strong first step for many Ringwood properties, especially older brick veneers and weatherboards, because it can reveal obvious hazards like damaged cabling, poor switchboard condition or missing safety switches. However, it can’t confirm wiring integrity inside walls or verify RCD trip performance. If we see red flags or the home is older/modified, we’ll recommend targeted testing by a licensed electrician.
We visually assess the switchboard enclosure and accessible components for heat or scorch marks, corrosion, water entry signs, missing covers or blanks, loose fittings, and general presentation and labelling. We also note the apparent presence and arrangement of circuit protection devices such as safety switches. Because this is visual-only, we do not dismantle live equipment or conduct electrical testing.
No. A visual inspection is not a compliance certificate and does not replace work completed and signed off by a licensed electrician. What we can do is identify visible safety concerns and likely non-compliance indicators, then recommend the right next step. If you need compliance confirmation (for example, after renovations or for rental requirements), engage a licensed electrician for testing and certification.
Ringwood has many homes that have been upgraded in stages, and DIY work can show up around garages, alfresco areas, and under-house storage spaces. Visually, we look for mismatched components at the switchboard, makeshift joins, unsupported cabling, incorrect outdoor fittings, and damage where new work meets older wiring. While we can’t see inside walls, visible workmanship issues often indicate broader risks.
This service is a visual-only assessment. We visually check for the presence of smoke alarms where accessible and note any obvious concerns with placement or missing units. For safety switches, we note visible presence and configuration but do not conduct trip-time testing or electrical measurements. If you want functional testing, we recommend booking a licensed electrician to test and confirm performance.
Still have questions?
Get in TouchCall ACE Building and Pest Inspections on 0413 163 187 for a practical visual assessment of switchboard condition, visible wiring safety, safety switches and smoke alarm presence—ideal for Ringwood homes with mixed-era upgrades.