Wantirna has a mix of older brick veneer homes and renovated properties, where DIY upgrades and ageing switchboards can hide safety switch gaps and overloaded circuits.
Answer a few quick questions to receive your personalised quote for Wantirna
Complete this step to continue
Our comprehensive service includes everything you need to make an informed decision about your property.
We visually assess the switchboard for clear access, moisture/dust entry, heat damage marks, loose or missing blanks, and whether circuits are sensibly labelled. Poor labelling and overcrowding can slow emergency shut-off and often indicates messy alterations that warrant electrician review.
We identify whether safety switches appear installed and which circuits they seem to protect based on layout and labelling. In renovated Wantirna homes, it’s common to find partial coverage where newer areas are protected but older lighting or power circuits are not, increasing shock risk.
Where visible (roof space entry, underfloor access points, garage, sub-board areas), we look for damaged insulation, unsupported cabling, exposed conductors, taped joins, or non-compliant connections. These are visual indicators that the installation may be unsafe and needs licensed electrical work.
We check a representative sample of outlets and switches for cracking, burn marks, looseness, or incorrect fitment to wall plates. Heat discolouration around points can indicate overloading or poor termination, which is a common issue where extra appliances have been added over time.
We visually confirm smoke alarms are present and consider whether placement appears reasonable for a typical Wantirna family home layout. We note missing units, outdated-looking alarms, or placement concerns so you can follow up for compliance and safety improvements.
We look for visual clues of non-professional work such as uneven faceplates, mismatched fittings, improvised cable routes, or add-on circuits with unclear labelling. Wantirna properties with extensions and garage conversions are especially prone to these tell-tale signs.
Discover why thousands of property buyers trust us with their most important investment.
Professional inspections with attention to every detail. Here's a glimpse of our work.
Inspection photo 1
Inspection photo 2
Inspection photo 3
Get Electrical Visual Inspection as part of a comprehensive inspection package
Find answers to the most frequently asked questions about our inspection service.
In Wantirna we often see switchboards that have been added to over time, mixed labelling, and partial safety switch (RCD) coverage where only newer circuits are protected. Renovations and garage conversions can also leave visible signs of DIY work, such as mismatched fittings or untidy cabling routes. We flag these visual indicators and recommend follow-up by a licensed electrician where needed.
This is a visual-only inspection. We assess accessible electrical components and look for obvious defects, safety concerns, and indicators of non-compliant or ageing installations. We do not perform invasive work, dismantle live equipment, or carry out formal electrical testing and certification. If we identify concerns, we’ll recommend the appropriate next step, which is typically further testing or repairs by a licensed electrician.
Yes. We visually review the switchboard to identify the presence of safety switches (RCDs), the apparent circuit coverage based on layout and labelling, and any visible signs of stress such as heat marks, damaged components, or overcrowding. If the board appears dated or poorly configured for modern loads, we’ll note it and advise an electrician to assess upgrade options.
Split-era upgrades can create uneven safety and capacity. Newer renovated areas may have additional circuits, higher-demand appliances, and modern fittings, while original sections may still rely on older wiring methods or lack full safety switch coverage. That combination can show up as cramped switchboards, unclear circuit separation, or visible defects at older fittings. A visual inspection helps pinpoint where the two eras don’t integrate cleanly.
We visually check for the presence of smoke alarms and note obvious placement or condition issues. Because this is not a functional test or certification, we can’t confirm operation or compliance in the same way an electrician can. If alarms appear missing, outdated, or poorly located for the home’s layout, we’ll recommend follow-up to ensure your Wantirna property meets safety expectations.
Still have questions?
Get in TouchChoose ACE Building and Pest Inspections for a detailed visual check of switchboard condition, safety switch coverage, visible wiring issues and smoke alarm presence in Wantirna. Call 0413 163 187 to arrange an inspection.