Loading...
Loading...
Croydon Hills homes often include 80s–90s builds with later renos, added downlights and outdoor circuits for sloped, garden-heavy blocks—exactly where polarity faults, overloaded switchboards and missing RCD protection can hide.
Answer a few quick questions to receive your personalised quote for Croydon Hills
Complete this step to continue
Our comprehensive service includes everything you need to make an informed decision about your property.
We test for correct active/neutral orientation where accessible. Polarity faults can make switches isolate the wrong conductor, leaving parts of a fitting energised even when ‘off’, which increases shock risk during normal use and maintenance.
We check the switchboard setup for obvious hazards such as mixed device types, signs of overheating, deteriorated components and poor circuit identification. Clear labelling and a tidy board reduce the chance of unsafe isolation during an emergency or repair.
We confirm whether RCDs are installed where expected and perform basic testing using the test function where appropriate. RCDs are critical for shock protection, especially on outdoor circuits, wet areas and power points used for portable appliances.
We inspect visible cabling, joins and terminations for damage, heat stress, brittle insulation, unsupported runs and non-compliant DIY-style connections. These issues can lead to arcing, nuisance tripping or fire risk, particularly where loads have increased after renovations.
We note smoke alarm locations and perform operational checks where accessible. Working alarms matter most in sleeping and hallway zones, and older alarms may be past service life or incorrectly positioned after ceiling changes.
We document observable electrical risks and provide clear recommendations for follow-up by a licensed electrician, including likely priorities such as RCD upgrades, switchboard tidy-up, replacement of damaged fittings, or rectification of polarity issues.
Discover why thousands of property buyers trust us with their most important investment.
Professional inspections with attention to every detail. Here's a glimpse of our work.
Inspection photo 1
Inspection photo 2
Inspection photo 3
Get Electrical Safety Assessment as part of a comprehensive inspection package
Find answers to the most frequently asked questions about our inspection service.
They can. Many Croydon Hills properties have had kitchens, lighting and outdoor power added over time, and older circuits don’t always get upgraded at the same time. Polarity problems can occur where fittings or outlets were altered incorrectly, while missing or poorly protected circuits are common where outdoor areas, sheds or extensions were added. An assessment helps flag these risks before you rely on the system daily.
No. This assessment is a targeted safety inspection and polarity-focused check of accessible components to identify hazards and likely non-compliances. Any repairs, upgrades or certification must be completed by a licensed electrician. If we find concerns, we’ll outline what to discuss with your electrician so you can obtain the right compliance documentation for any rectification work.
We focus on practical safety items: polarity testing where accessible, switchboard condition and protection devices, presence and basic operation of safety switches (RCDs), visible wiring condition, and smoke alarm checks. We also note obvious damage or heat stress around fittings and outlets that may indicate overloading or poor connections and recommend further electrical investigation where needed.
Outdoor circuits deserve extra attention because they’re exposed to moisture, temperature changes and physical damage from gardening equipment. In Croydon Hills, it’s common to see multiple exterior power points, deck lighting and shed supplies added over time. We look for appropriate RCD protection, safe polarity, and signs of wear at accessible fittings so you can reduce shock risk and nuisance tripping in high-use outdoor areas.
Often yes, but the key is understanding what’s urgent and what’s an upgrade. Some issues, like missing RCD protection or heat damage at the switchboard, should be treated as priority safety items. We provide clear notes so you can seek an electrician’s quote, plan rectification after settlement, or negotiate with the vendor based on the scope and urgency of the risks identified.
Still have questions?
Get in TouchChoose ACE Building and Pest Inspections for practical polarity testing and safety-focused checks across switchboards, RCDs and smoke alarms in Croydon Hills—call 0413 163 187 to arrange your inspection.