Blackburn South has a mix of older family homes and renovated properties where DIY upgrades and ageing wiring can leave polarity, switchboard and safety switch issues hidden behind fresh finishes.
Answer a few quick questions to receive your personalised quote for Blackburn South
Complete this step to continue
Our comprehensive service includes everything you need to make an informed decision about your property.
We test for correct active/neutral orientation where accessible, because reversed polarity can leave parts of appliances energised even when switched off, increasing shock risk during everyday use and maintenance.
We check the switchboard for the presence and condition of safety switches (RCDs), circuit breakers, and clear circuit identification. Poor labelling and mismatched protective devices can delay isolation during an emergency and increase the chance of nuisance tripping or inadequate protection.
We identify whether wet areas and commonly used circuits are protected by RCDs, including kitchen, laundry and outdoor circuits where moisture and metal surfaces increase the likelihood and severity of electric shock.
Where accessible, we look for warning signs such as heat damage, brittle insulation, exposed conductors, unsuitable joins and unsecured cabling. These indicators can suggest overloaded circuits, ageing wiring, or previous work that needs an electrician’s review.
We note the presence and general placement of smoke alarms and highlight obvious issues such as missing units or poorly located alarms. If hardwired alarms are present, we flag concerns that may warrant an electrician’s further testing.
We pay close attention to signs of non-compliant or improvised work around renovations, garages, pergolas and backyard power. Add-on circuits and outdoor installations are common trouble spots for incorrect protection, weather exposure and unsafe fittings.
Discover why thousands of property buyers trust us with their most important investment.
Professional inspections with attention to every detail. Here's a glimpse of our work.
Inspection photo 1
Inspection photo 2
Inspection photo 3
Get Electrical Safety Assessment as part of a comprehensive inspection package
Find answers to the most frequently asked questions about our inspection service.
Renovations in Blackburn South often add new circuits for kitchens, heating/cooling, and outdoor areas, but older sections of the home may still rely on ageing wiring and an outdated switchboard. That mix can hide polarity issues, missing RCD protection, or poor-quality joins behind walls and cabinetry. An assessment checks key safety indicators and helps you prioritise electrical work before you depend on the system every day.
No. Our Electrical Safety Assessment focuses on safety indicators and polarity checks at accessible points, plus a practical review of switchboard and protection. Any defects we identify should be rectified by a licensed electrician, who can then complete any required compliance testing, repairs and certification. Think of this service as a targeted safety screen to uncover risks early and guide next steps.
We look for the presence and condition of safety switches (RCDs), the type and condition of breakers, signs of overheating or damage, and whether circuits are clearly labelled. We also note older-style components that may not provide modern levels of protection. These issues matter because the switchboard is the control centre for isolation and fault protection, especially in busy family homes with higher electrical loads.
They can be. Blackburn South homes often have decks, pergolas, sheds or garden lighting, and outdoor circuits are exposed to weather, moisture and physical damage. We pay attention to whether outdoor power appears appropriately protected by an RCD and whether there are visible risk indicators such as cracked fittings, makeshift wiring runs or unsafe joins. Any concerns are flagged for an electrician to test and rectify.
Treat it as a priority safety item. We’ll explain what we found and why it matters, then you should engage a licensed electrician to confirm the fault, isolate affected circuits if needed, and carry out compliant repairs or upgrades. If you’re buying, the findings can also support negotiations or help you plan immediate post-settlement works so the home is safe to occupy.
Still have questions?
Contact us for more informationACE Building and Pest Inspections focuses on polarity, switchboard safety and RCD coverage so you can address electrical hazards early. Call 0413 163 187 to arrange an inspection in Blackburn South.