Loading...
Loading...
Springvale homes often include older wiring, renovations and busy rental properties—polarity faults and switchboard issues can slip through. A targeted assessment helps confirm circuits are wired correctly and safety devices can do their job.
Answer a few quick questions to receive your personalised quote for Springvale
Complete this step to continue
Our comprehensive service includes everything you need to make an informed decision about your property.
We test for correct active/neutral orientation at accessible outlets, as reversed polarity can leave appliance switches ineffective and increase shock risk. This is particularly important where DIY-style replacements or older fittings may have been changed over the years.
We visually assess the switchboard for heat damage, corrosion, missing blanks, loose-looking terminations, and signs of poor-quality additions. We also note the type and arrangement of breakers to flag set-ups that commonly indicate outdated protection.
We check whether RCDs are present and test using the in-built test button where safe to do so. We identify circuits that appear not to be RCD-protected, which is a common safety gap in older Springvale homes that have only partially upgraded boards.
We look for brittle insulation, unsupported cabling, taped joins, and older-style wiring that may be at higher risk of deterioration. In homes with multiple renovations, we also look for signs of mixed cabling methods and untidy junctions.
We check accessible outlets and nearby fittings for signs of overheating or inappropriate set-ups around high-use areas (ovens, dishwashers, washers and dryers). These are common areas for overloaded circuits and poor-quality additions after remodels.
We note visible smoke alarms, power type where identifiable, and any obvious placement concerns. While we don’t certify compliance as an electrician would, we flag issues that may affect safety and recommend follow-up where alarms are missing, aged or poorly located.
Discover why thousands of property buyers trust us with their most important investment.
Professional inspections with attention to every detail. Here's a glimpse of our work.
Inspection photo 1
Inspection photo 2
Inspection photo 3
Get Electrical Safety Assessment as part of a comprehensive inspection package
Find answers to the most frequently asked questions about our inspection service.
They can, particularly where older houses have had kitchens, garages or extensions updated at different times. Polarity faults may occur after outlet or light fitting changes, and they’re not always visible. Our assessment includes polarity testing at accessible power points and checks for visible signs of poor wiring practices, then we recommend targeted electrical rectification where required.
No. An Electrical Safety Assessment is a practical safety-focused inspection that includes polarity testing and visual checks of the switchboard, RCDs, accessible wiring and smoke alarm basics. Compliance certification and repairs must be completed by a licensed electrician, and some testing requires isolation or specialised procedures beyond a standard property inspection.
We visually check the switchboard for signs of overheating, damage, corrosion, missing covers or blanks, and questionable additions. We also note the presence and type of protective devices such as RCDs and circuit breakers. If anything suggests an unsafe condition or outdated protection, we document it and recommend further assessment by a licensed electrician.
In Springvale units and townhouses, common issues include older switchboards that haven’t been fully updated, limited RCD coverage, and alterations made by multiple owners over time. Shared walls and tight roof spaces can also make cabling harder to inspect or maintain. Our assessment focuses on accessible points, polarity results and the switchboard set-up so you can identify safety gaps early.
We test a representative selection of accessible outlets and key areas to identify polarity and practical safety issues. Some outlets may be inaccessible due to furniture, locked rooms or fixed appliances. If results indicate broader concerns, we may recommend a licensed electrician carry out more comprehensive circuit testing, including insulation resistance and detailed fault-finding.
Still have questions?
Get in TouchACE Building and Pest Inspections focuses on polarity testing, switchboard safety and safety switch checks so you can act on real electrical risks before you move in. Call 0485 857 077 to arrange your inspection.