Loading...
Loading...
Chirnside Park homes often mix older electrics with modern upgrades for heating, cooling and renovations—our visual check helps spot mismatched switchboards, DIY wiring clues and missing safety devices before they become hazards.
Answer a few quick questions to receive your personalised quote for Chirnside Park
Complete this step to continue
Our comprehensive service includes everything you need to make an informed decision about your property.
We visually check the switchboard for outdated components, missing blanks, damaged covers, signs of heat stress, corrosion, loose labeling and any indications the board may not suit current household loads. This matters because switchboard defects are a common starting point for overheating and circuit protection failures.
We identify whether safety switches appear to be installed and which circuits they seem to protect based on visible labeling and device types. This helps you understand likely protection coverage, especially in homes where renovations may have added new circuits that aren’t clearly documented.
We look for accessible cabling that appears damaged, exposed, poorly supported, or run in a way that increases risk (for example, through storage areas where it can be snagged or crushed). We also note any improvised joins or fittings that suggest non-professional work.
We visually assess accessible outlets, switches and visible light fittings for cracking, scorch marks, looseness, missing covers and other warning signs. These issues can indicate overheating, moisture exposure or poor terminations that warrant electrician attention.
We check for visible smoke alarms and comment on placement and general condition where accessible. We’ll flag missing units, older-looking alarms, or poor locations that reduce effectiveness, and recommend follow-up where compliance can’t be confirmed visually.
We pay close attention to outdoor power points, patio/garage fittings and wet areas like bathrooms and laundries for visible exposure to moisture, damaged seals, and inappropriate fittings. This is important in family homes where outdoor entertaining areas are heavily used.
Discover why thousands of property buyers trust us with their most important investment.
Professional inspections with attention to every detail. Here's a glimpse of our work.
Inspection photo 1
Inspection photo 2
Inspection photo 3
Get Electrical Visual Inspection as part of a comprehensive inspection package
Find answers to the most frequently asked questions about our inspection service.
It’s a smart step, especially if the property shows signs of partial renovations. In Chirnside Park, it’s common to see older switchboards retained while kitchens, bathrooms or added rooms increase electrical load. A visual inspection can flag outdated board components, unclear circuit labelling, heat damage indicators and missing safety features, so you can budget for an electrician assessment where needed.
No. This is a visual-only assessment of accessible electrical components and safety items. We don’t remove switchboard internals, test circuits, confirm earthing, or measure RCD trip times. If we see warning signs—such as heat stress, poor labelling, damaged fittings or questionable wiring practices—we’ll recommend follow-up testing and repairs by a licensed electrician.
We visually assess the switchboard enclosure, visible protective devices, general condition, signage and any obvious damage or modifications. We also look for indicators that the board may be undersized for the home’s current usage, such as extensive add-ons, poor organisation, missing covers or signs of overheating. Where access is limited, we note constraints and advise next steps.
They can be, because many Chirnside Park homes have garages, pergolas, garden lighting and backyard outlets added over time. Outdoor fittings are exposed to weather and wear, and older installations may not match modern safety expectations. We visually check accessible external points, fittings and cabling for damage, unsuitable fittings, and moisture-related deterioration, then recommend electrician follow-up if risks are present.
We can comment on the visible presence, general condition and likely placement of smoke alarms, but we can’t certify compliance through a visual inspection alone. Requirements can depend on the dwelling’s layout and any alterations. If alarms appear missing, outdated or poorly located, we’ll flag it and recommend upgrading and/or having a qualified professional confirm compliance for the specific property.
Still have questions?
Get in TouchChoose ACE Building and Pest Inspections for a clear, visual-only assessment of switchboards, visible wiring risks, safety switches and smoke alarms—call 0413 163 187 to organise an inspection in Chirnside Park.