Loading...
Loading...
Blackburn North has many mid-century homes and renovated family properties where older wiring, upgraded switchboards and DIY additions can leave visible safety gaps—especially around switchboards, smoke alarms and safety switches.
Answer a few quick questions to receive your personalised quote for Blackburn North
Complete this step to continue
Our comprehensive service includes everything you need to make an informed decision about your property.
We visually assess the switchboard for general condition, cover integrity, circuit identification, signs of heat stress, and whether safety switches/RCDs appear to be present and appropriately labelled. Clear labelling and a tidy, enclosed board reduces the risk of incorrect isolation and highlights where upgrades may be needed.
We check accessible cabling where visible (such as garages, underfloor edges, subfloor entry points or roof access hatches if safe and accessible) for obvious deterioration, unsupported runs, or exposure. Damaged insulation and poorly supported wiring can indicate age-related degradation or previous alterations that warrant electrician review.
We look for cracked plates, scorch marks, loose fittings, and signs of overheating or arcing around commonly used outlets and switches. These visible indicators can suggest overloading, poor connections, or worn components—especially in high-use areas like kitchens, living rooms and home offices.
Bathrooms, laundries and kitchens are checked for visible concerns such as unsuitable fittings near water sources, damaged seals, and placement issues that may raise safety questions. Wet areas are higher-risk environments, so even minor visible issues deserve prompt follow-up by a licensed electrician.
We note the presence of smoke alarms and any visible issues with placement, damage or missing units in areas we can access. While we don’t test alarm performance as part of a visual-only inspection, missing or poorly located alarms can be flagged early so you can confirm compliance requirements for the property.
We visually check exterior lights, weatherproof outlets, and garage fittings for signs of water entry risk, UV degradation, and unsafe cable routing. Blackburn North properties with outdoor entertaining areas, sheds or older garages often show wear that can compromise safety if left unattended.
Discover why thousands of property buyers trust us with their most important investment.
Professional inspections with attention to every detail. Here's a glimpse of our work.
Inspection photo 1
Inspection photo 2
Inspection photo 3
Get Electrical Visual Inspection as part of a comprehensive inspection package
Find answers to the most frequently asked questions about our inspection service.
Yes, it’s a sensible step. Many Blackburn North properties from that era have had partial upgrades—like a newer kitchen or added outdoor power—while older components may remain elsewhere. A visual inspection helps identify red flags such as aged cabling where visible, switchboard condition issues, or overheating marks at outlets. Any concerns can then be targeted for testing by a licensed electrician.
It’s a visual-only inspection. We assess what can be safely seen and accessed without invasive work, such as switchboard condition, visible wiring, fittings, and signs of overheating or damage. We don’t dismantle electrical components or perform electrical testing. If we observe concerns, we’ll document them clearly and recommend follow-up testing or repairs by a licensed electrician.
We visually check whether safety switches/RCDs appear to be present at the switchboard and note labelling and obvious condition concerns. Because this is a visual inspection, we’re not performing instrument testing or confirming trip times. If RCD coverage looks incomplete or unclear, we’ll recommend an electrician confirm protection for power and lighting circuits, especially in wet areas and external outlets.
Garages and outdoor zones often show the earliest visible wear. We commonly watch for cracked or sun-damaged fittings, cable runs that aren’t well protected, and weatherproof points that may not be sealed correctly. Outdoor entertaining areas and older garages can also have added circuits over time, so we note anything that looks inconsistent, exposed, or potentially water-affected and recommend electrician review where needed.
Use the report to focus discussions on specific, observable issues rather than general concerns. If we identify visible switchboard defects, overheating indicators, or damaged fittings, you can request that the vendor repairs them (with evidence from a licensed electrician) or negotiate a price adjustment. It also helps you prioritise urgent safety items versus upgrades you can plan after settlement.
Still have questions?
Get in TouchACE Building and Pest Inspections focuses on the visible safety clues that matter—switchboard condition, wiring presentation, safety switch presence and smoke alarm observations. Call 0413 163 187 to arrange an Electrical Visual Inspection in Blackburn North (3130).