Loading...
Loading...
Mulgrave homes often mix original wiring with newer renovations, plus busy family loads and home-office upgrades—polarity and switchboard issues can hide until something trips, overheats or shocks.
Answer a few quick questions to receive your personalised quote for Mulgrave
Complete this step to continue
Our comprehensive service includes everything you need to make an informed decision about your property.
We test for correct active/neutral/earth orientation at accessible outlets and key points. Incorrect polarity can leave appliance casings energised and increases shock risk, especially in kitchens, laundries and garages where conductive surfaces and moisture are common.
We inspect the switchboard for signs of overheating, corrosion, poor labelling, exposed openings and device condition. We also note whether modern protective devices are present and appropriately set up for the circuits serving bathrooms, kitchens and outdoor areas.
Where fitted and safely accessible, we check whether safety switches appear to protect the right circuits and whether the test function operates. Missing or non-functional RCDs can mean faults go undetected until someone receives a shock.
We look for common red flags such as brittle insulation, damaged sheathing, unsupported cables, unsafe joins, and evidence of heat or arcing near terminals. These indicators often show up where renovations have added downlights, extra outlets or garden circuits.
We check whether smoke alarms are present and note obvious placement concerns that can affect performance, such as being too close to kitchens or missing coverage near bedrooms. This supports compliance conversations and highlights areas to improve early warning.
We note visible safety concerns around wet areas and external points, such as weatherproofing, clear damage, and unsafe proximity to water sources. These are common risk spots in Mulgrave properties with pergolas, patios, and upgraded outdoor entertaining areas.
Discover why thousands of property buyers trust us with their most important investment.
Professional inspections with attention to every detail. Here's a glimpse of our work.
Inspection photo 1
Inspection photo 2
Inspection photo 3
Get Electrical Safety Assessment as part of a comprehensive inspection package
Find answers to the most frequently asked questions about our inspection service.
Renovations in Mulgrave often add new power points, lighting and outdoor circuits, sometimes tying into older wiring. If any outlet is wired with reversed polarity, a device can operate but still present a shock hazard or increase the chance of arcing faults. Polarity testing helps catch wiring errors early, especially in kitchens, laundries, garages and outdoor entertaining areas.
No. An Electrical Safety Assessment is a practical safety-focused inspection and testing process to identify hazards and red flags. Compliance certificates and prescribed electrical work must be completed and signed off by a licensed electrician. We provide clear findings and prioritised recommendations so you can brief an electrician efficiently and target the areas that matter most.
We focus on the switchboard and a representative selection of accessible outlets and circuits for polarity and basic safety function. We also assess visible wiring condition, safety switch presence/function where applicable, and practical risks around wet areas and external power. If access is limited (locked boards, obstructed points), we note the limitation and explain the implications.
Many established Mulgrave homes were built before modern circuit protection became standard, and some have had piecemeal upgrades over time. If the household now runs higher loads—ducted HVAC, modern ovens, workshop tools or EV charging—the switchboard and circuit protection need to match. Our assessment highlights overcrowding, heat signs, missing RCD coverage and other cues that suggest an upgrade is worth discussing with an electrician.
Ensure we can access the switchboard, power points and any areas with recent electrical changes, such as renovated kitchens, garages and outdoor entertaining zones. If you have solar, a pool, a spa, or a shed with power, let us know so we can include relevant checks. Gather any prior electrical paperwork, and note any recurring issues like tripping or flickering lights.
Still have questions?
Get in TouchACE Building and Pest Inspections delivers clear polarity and switchboard safety findings so you can act quickly on real hazards—call 0485 857 077 to schedule your Mulgrave inspection.