Loading...
Loading...
Lysterfield homes often mix older wiring, newer renovations, sheds and outdoor circuits—polarity and safety switch faults can hide until you plug in tools, heaters or pool equipment.
Answer a few quick questions to receive your personalised quote for Lysterfield
Complete this step to continue
Our comprehensive service includes everything you need to make an informed decision about your property.
We test for correct active/neutral polarity at accessible outlets to identify reversed polarity or wiring faults that can leave appliance casings energised and increase shock risk.
We visually assess the switchboard for safety concerns such as deteriorated components, missing covers/blanks, heat stress indicators, and unclear circuit labelling that can delay safe isolation in an emergency.
We confirm whether RCD protection is present and perform basic operational testing to flag units that don’t trip as expected, noting areas that may be unprotected (common with older circuits and later add-ons).
We inspect accessible cabling and fittings for signs of unsafe joins, exposed conductors, brittle insulation, and DIY-style alterations—issues that are often found where renovations or shed fit-outs were done in stages.
We check for smoke alarms, their placement and observable condition, and note missing or unsuitable alarms so you can address gaps promptly, particularly in sleeping areas and hallways.
We review accessible outdoor and wet-area electrical points for suitability and visible issues (such as damaged covers or poor weather sealing) because these locations face higher exposure to moisture and wear on Lysterfield blocks.
Discover why thousands of property buyers trust us with their most important investment.
Professional inspections with attention to every detail. Here's a glimpse of our work.
Inspection photo 1
Inspection photo 2
Inspection photo 3
Get Electrical Safety Assessment as part of a comprehensive inspection package
Find answers to the most frequently asked questions about our inspection service.
Sheds and workshops in Lysterfield often run power for tools, chargers, fridges, or compressors, and the wiring may have been added years after the house was built. If an outlet is wired with incorrect polarity, a fault can energise parts of an appliance that should be neutral, increasing shock risk. A polarity check helps uncover these issues before heavy-use equipment makes the problem obvious.
Yes. We visually assess the switchboard for safety issues and confirm whether safety switches (RCDs) are present, then perform basic trip testing where accessible. We also note concerns like missing covers, ageing components, or unclear circuit labelling. If we identify risks or limitations, we recommend follow-up with a licensed electrician for rectification and any further testing required.
We check for the presence, placement and observable condition of smoke alarms and record any missing or concerning setups. Smoke alarms are a key safety and compliance consideration, especially in sleeping areas and hallways. If alarms appear absent, unsuitable, or poorly positioned, we outline what to address so you can upgrade promptly through the appropriate channels.
Many Lysterfield homes have had piecemeal upgrades—new kitchens, added rooms, converted garages, or outdoor circuits—while older wiring may remain on other parts of the property. This can lead to mixed protection levels, outlets with polarity faults, worn fittings, or questionable joins where additions were made. We focus on identifying these practical safety risks through polarity testing and targeted observations of accessible components.
No. An Electrical Safety Assessment is a targeted safety-focused inspection and polarity assessment of accessible electrical points and key protections. It does not replace a full electrical compliance test, nor does it certify the entire installation. If we find issues, we document them clearly so a licensed electrician can carry out any required detailed testing, repairs, and certification where applicable.
Still have questions?
Get in TouchACE Building and Pest Inspections focuses on polarity, switchboard protections, RCD operation and smoke alarm checks—practical safety findings tailored to Lysterfield homes. Call 0485 857 077.