Kingsville’s mix of older weatherboards, renovated cottages and subdivided units can hide DIY wiring changes and crowded switchboards—polarity testing helps catch shock and fire risks before you move in.
Answer a few quick questions to receive your personalised quote for Kingsville
Complete this step to continue
Our comprehensive service includes everything you need to make an informed decision about your property.
We test selected power points for correct active/neutral/earth configuration. Polarity errors can energise appliance casings or make switches interrupt the wrong conductor, creating a serious shock risk even when something appears switched off.
We visually assess the switchboard for overcrowding, heat stress indicators, outdated components and missing circuit labelling. Clear circuit identification matters for safe isolation during emergencies and for targeted repairs by an electrician.
We confirm where safety switches are installed and perform operational checks where accessible. RCD protection is critical in wet areas and outdoor circuits, reducing the severity of electric shock when a fault occurs.
We look for damaged insulation, exposed conductors, unsafe joins, unsupported cabling and deterioration in accessible locations such as garages, underfloor access points and external connections. These issues can indicate higher risk of short circuits and overheating.
We check for the presence of smoke alarms and note obvious placement or condition concerns in accessible areas. While this isn’t a full compliance certification, it highlights gaps to address before move-in or leasing.
We note risk indicators around kitchens, bathrooms and laundries (where accessible), such as outlet condition, proximity to water sources and signs of heat or arcing. These locations commonly carry higher load and moisture exposure, increasing the likelihood of faults.
Discover why thousands of property buyers trust us with their most important investment.
Professional inspections with attention to every detail. Here's a glimpse of our work.
Inspection photo 1
Inspection photo 2
Inspection photo 3
Get Electrical Safety Assessment as part of a comprehensive inspection package
Find answers to the most frequently asked questions about our inspection service.
Many Kingsville houses have had piecemeal renovations—kitchen updates, added outdoor power, or converted rooms—often completed years apart. Polarity faults can be introduced during these changes and may not be obvious day to day. Testing helps identify outlets or circuits where the active and neutral are reversed or switching is unsafe, reducing the risk of shock, especially with older fittings and mixed wiring types.
No. This assessment is a safety-focused inspection that identifies hazards and red flags, including polarity issues, switchboard concerns, safety switch operation and visible wiring problems. Compliance certification and rectification work must be completed by a licensed electrician and may involve more intrusive testing and access. Our report helps you understand what to prioritise and what to ask an electrician to verify or upgrade.
Yes. We review the switchboard setup, note the types of protective devices present, and check for the presence of safety switches (RCDs) where accessible. We also look for signs that the board is overloaded or poorly organised, and whether circuits are clearly labelled. If we find gaps in protection or concerning condition issues, we’ll recommend electrician follow-up.
Kingsville has a mix of newer units and older front homes on subdivided blocks, which can mean separate meters, shared mains, or upgrades layered onto older infrastructure. That can lead to crowded switchboards, added circuits without clear labelling, or inconsistent protection across different parts of the property. An assessment helps pinpoint where safety switches, polarity and visible wiring condition need attention before you rely on the system.
Treat polarity faults and switchboard defects as priority items. We recommend engaging a licensed electrician to isolate the affected circuit, confirm the fault, and carry out compliant repairs or upgrades. If you’re buying in Kingsville, use the report to request rectification before settlement or to negotiate. If you already own the home, schedule the electrical work promptly, especially for wet areas and outdoor circuits.
Still have questions?
Get in TouchACE Building and Pest Inspections focuses on polarity testing and practical safety checks across switchboards, safety switches and accessible wiring so you can act on real risks. Call 0413 163 187 to arrange an assessment in Kingsville VIC 3012.