Loading...
Loading...
Glen Huntly blocks are often tight and close to neighbouring fences and older drainage lines, so a pre-slab check is crucial to confirm levels, moisture protection and reinforcement are right before concrete locks everything in.
Answer a few quick questions to receive your personalised quote for Glen Huntly
Complete this step to continue
Our comprehensive service includes everything you need to make an informed decision about your property.
We assess the prepared base for signs of soft spots, uncontrolled fill, uneven trimming and inadequate compaction indicators. A stable base helps prevent slab movement, edge beam cracking and future floor level issues.
We review formwork alignment, bracing and obvious level concerns that can affect slab thickness and finished floor heights. On tight Glen Huntly sites, small set-out errors can cause boundary clearance and drainage problems later.
We check that reinforcement is present where required and supported on appropriate chairs so it sits within the slab zone rather than on the ground. Correct placement improves structural performance and reduces cracking risk.
We inspect the vapour barrier for tears, punctures, correct laps and taping, and proper detailing around penetrations. This is critical for controlling ground moisture that can contribute to damp internal floors and flooring failures.
We look at plumbing and other penetrations for positioning, protection and sealing readiness, plus any rebates or set-downs for wet areas where visible. Getting these right pre-pour avoids costly jackhammering and patching.
We note whether the site appears to manage water away from the slab area, including obvious grading and potential ponding points. Wet base conditions and trapped water can compromise the pour quality and moisture barrier integrity.
Discover why thousands of property buyers trust us with their most important investment.
Professional inspections with attention to every detail. Here's a glimpse of our work.
Inspection photo 1
Inspection photo 2
Inspection photo 3
Find answers to the most frequently asked questions about our inspection service.
Book it after the site is prepared and the formwork, reinforcement and vapour barrier are installed, but before any concrete is poured. In Glen Huntly, pours can be scheduled quickly once steel is down, so organise the inspection as soon as you receive notice the slab is being set up. If the site gets rain, a re-check may be sensible before the pour.
This stage captures the critical items that become hidden forever once concrete is placed: base condition, reinforcement location and support, vapour barrier laps and penetrations, and the accuracy of formwork and set-outs. Later stages can show symptoms like cracking or dampness, but they can’t confirm whether steel was correctly chaired or whether the moisture barrier was torn under the slab.
Yes. Your report will clearly list observed issues, why they matter, and practical recommendations to address them before concrete is placed. We include photos so your builder or site supervisor can quickly locate items on the slab deck. The goal is to give you a straightforward checklist you can use in writing to request rectification prior to the pour.
Often, yes. Knock-down rebuild sites in Glen Huntly can have variable ground conditions from old driveways, garden beds and previous services, plus tight access that makes consistent base prep harder. Older drainage alignments and neighbouring boundaries can also influence where services and edge beams end up. A pre-slab inspection helps pick up these practical issues while they’re still correctable.
Rain can affect the prepared base, introduce ponding, and damage or shift the vapour barrier if trades continue working over it. If there has been significant rain or the site looks wet and muddy, it’s worth confirming the barrier is still intact, laps haven’t opened, and the base hasn’t been disturbed. Your builder may also need to manage water before proceeding.
Still have questions?
Get in TouchACE Building and Pest Inspections focuses on the make-or-break slab details—base prep, formwork, reinforcement and moisture barrier—so you can request fixes early. Call 0485 857 077.